Allpowers 20a solar charge controller

Solar Charge Controller With LCD Display

ALLPOWERS solar charge controller can immediately control the functioning of solar panel and battery in solar power device. It is straightforward to set up and also run.For protecting the lifeexpectations of your battery, once the voltage of the battery drop listed below 8V, the solar charge controller will turn off automatically (LCD will certainly be uneasily accessible at the exact same time).It"s an extremely Intelligent unit for solar panel.

You watching: Allpowers 20a solar charge controller

Solar Charge Controller must connect the battery first,and also then connect the solar panel,and finally the load!The disassembly sequence is contrary to the wiring order.


Fast view
ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V
from $17.99
*
" data-aspectratio="1.0" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator via USB Port Display 12V/24V">
*
" data-aspectratio="1.0" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator via USB Port Display 12V/24V">
*
" data-aspectratio="1.047945205479452" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator through USB Port Display 12V/24V">
*
" data-aspectratio="0.9196919691969196" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator through USB Port Display 12V/24V">
*
" data-aspectratio="0.9276018099547512" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator through USB Port Display 12V/24V">
*
" data-aspectratio="0.8571428571428571" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator via USB Port Display 12V/24V">
*
" data-aspectratio="0.9699321047526673" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V">
*
" data-aspectratio="1.0" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V">
*
" data-aspectratio="1.0" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V">
*
" data-aspectratio="1.047945205479452" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator through USB Port Display 12V/24V">
*
" data-aspectratio="0.9196919691969196" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator through USB Port Display 12V/24V">
*
" data-aspectratio="0.9276018099547512" data-sizes="auto" alt="ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator through USB Port Display 12V/24V">
*

ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator via USB Port Display 12V/24V

Regular price $17.99
/

Allpowers solar charge controller comes with a display that have the right to plainly indicate the standing and data, it deserve to be conveniently switched settings and also parameter configuration, suitable for home, industrial, commercial, and so on.

They were equipped through an industrial-grade STM 8 microprocessor to manage the charger and discharge procedure and it has actually a reputable battery to charge and also discharge period management

Features

Automatically control the functioning of solar panels and batteries in the solar mechanism.Overloading and short-circuit security.Build-in short-circuits security, open-circuit defense, reverse protection, overload protection.Protection from a lightning strikes.Prolengthy the battery life cycle and also save the pack work well.Easy to set up and run.Suitable for a small solar energy system.

Specification

Voltage: DC 12V/24VSelf-consuming: 10MARated Charge Current: 20ARated Load Current: 20AOvercharge Protection: 14.4V/28.8VOvercharge Floating charge: 13.7V/27.4VCharge recover voltage: 12.6V/25.2VOver-discharge Protection: 10.7V/21.4VOver-discharge Recover: 12.6V/25.2VUSB output: 5V/3AOperating temperature: -35℃-60℃Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in

Connection Diagram

*

Common Q&A

Q: How to install it?

A: (1)Battery --->(2)Solar panels ---> (3)DC load

Q: Why does the LCD screen end up being blank?

A: When the battery voltage is also low, the controller will soptimal output(≦ 8V, controller transforms itself off, LCD is empty, ≦ 10.7V, 12V output ports are not available); after the solar panels charging, it will certainly re-output once the battery will rerotate to 12.6V.

Q: What battery type is this controller supported?

A: (1)B-01=LEAD-ACID, 12V; B-02=LITHIUM ION 3s, 3*3.7V=11.1V; B03=LIFePO4 4s, 4*3.2V=12.8V. (B01 is the default kind, If you would certainly favor to switch to another 2 kinds, please choose it manually.)

Note:

Wire Range: 26-12 AWG

Make certain the voltage of your battery reaches 11V for initial usage, so regarding begin up for the controller to registered the battery kind as necessary.

See more: Top 10 Best Solar Panels Somerville Ma, Best 15 Solar Panel Installers In Somerville, Ma

Old batteries may be degraded the capacity after thousands of cycles, easily drop reduced than 8V, which results in the controller will certainly be shut off (LCD screen become entirely “DEAD”).

Indoor usage only: the working temperature of this controller is -35°C to +60°C. Throughout warm sunny days, the temperature exterior can go up to 60-75°C. Please do store the controller stay in a cool and well-ventilated area to maintain good warmth dissipation


Allpowers solar charge controller comes with a display that can plainly indicate the status and data, it deserve to be conveniently switched settings and parameter configuration, suitable for house, industrial, commercial, etc.

They were equipped with an industrial-grade STM 8 microprocessor to regulate the charger and discharge process and also it has a trusted battery to charge and discharge period management

Features

Automatically control the working of solar panels and also batteries in the solar mechanism.Overloading and short-circuit security.Build-in short-circuits protection, open-circuit protection, reverse protection, overfill protection.Protection from a lightning strikes.Prolengthy the battery life cycle and store the pack work well.Easy to put up and also run.Suitable for a tiny solar power device.

Specification

Voltage: DC 12V/24VSelf-consuming: 10MARated Charge Current: 20ARated Load Current: 20AOvercharge Protection: 14.4V/28.8VOvercharge Floating charge: 13.7V/27.4VCharge recuperate voltage: 12.6V/25.2VOver-discharge Protection: 10.7V/21.4VOver-discharge Recover: 12.6V/25.2VUSB output: 5V/3AOperating temperature: -35℃-60℃Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in

Connection Diagram

*

Typical Q&A

Q: How to install it?

A: (1)Battery --->(2)Solar panels ---> (3)DC load

Q: Why does the LCD display screen become blank?

A: When the battery voltage is as well low, the controller will certainly soptimal output(≦ 8V, controller transforms itself off, LCD is empty, ≦ 10.7V, 12V output ports are not available); after the solar panels charging, it will re-output as soon as the battery will return to 12.6V.

Q: What battery form is this controller supported?

A: (1)B-01=LEAD-ACID, 12V; B-02=LITHIUM ION 3s, 3*3.7V=11.1V; B03=LIFePO4 4s, 4*3.2V=12.8V. (B01 is the default type, If you would certainly like to switch to one more 2 types, please choose it manually.)

Note:

Wire Range: 26-12 AWG

Make sure the voltage of your battery reaches 11V for initial usage, so regarding begin up for the controller to registered the battery type accordingly.

Old batteries might be degraded the capacity after thousands of cycles, easily drop lower than 8V, which outcomes in the controller will certainly be shut off (LCD screen become totally “DEAD”).

Indoor use only: the working temperature of this controller is -35°C to +60°C. During warm sunny days, the temperature outside can go approximately 60-75°C. Please perform keep the controller stay in a cool and well-ventilated location to preserve great warmth dissipation